恒溫恒濕培養箱：恒溫恒濕箱在運作時需注意一些操作細節,今天，我們在這里給帶分享一下。

Constant temperature and humidity incubator: Constant temperature and humidity incubator in operation need to pay attention to some operational details, today, we are here to share with you.

1、當恒溫恒濕箱完成低溫運轉時,溫度在60℃時實行干燥處理約30分鐘后再打開箱門,以免影響后面試驗時的測定時間或造成蒸發器結冰的現象；

1. When the constant temperature and humidity box completes the low temperature operation, the door of the box will be opened after drying treatment for about 30 minutes at 60 C, so as to avoid affecting the measuring time of the later test or causing the phenomenon of freezing of the evaporator.

2、非本機工作人員不可對恒溫恒濕箱機器進行維修和檢查、并且在檢查時,除了有專職人員進行之外,同時還要有專業的電工及電路檢修人員,防止不知情的人員進行通電合閘,從而造成觸電危險。

2. Non-local staff can not repair and inspect the machine of constant temperature and humidity box, and when inspecting, besides full-time personnel, professional electricians and circuit maintenance personnel should also be required to prevent uninformed personnel from conducting electric closing, thus causing electric shock danger.

3、使用恒溫恒濕箱時一定要保證是安全確實的接地,以免產生靜電感應；

3. When using the constant temperature and humidity box, we must ensure the safe and reliable grounding, so as to avoid electrostatic induction.

4、電路斷路器和超溫保護器這種提供測試品以及操作者人身安全的保護設備,一定要定期進行詳細的檢查；

4. Circuit breakers and overtemperature protectors, which provide test products and operators'personal safety, must be inspected regularly in detail.

5、濕球紗布的安裝位置一定要準確,才能量取正確的相對濕度；

5. The installation position of wet ball gauze must be accurate in order to measure the correct relative humidity.

6、箱體在運轉中,請勿以手觸檢查,以免觸電或被風扇所傷從而發生危險。

6. When the box is in operation, please do not check it by hand to avoid electric shock or fan injury.

以上就是恒溫恒濕培養箱廠家給大家給大家帶來的資訊分享，了解更多的相關知識介紹，可以關注我們的官方網站!

Above is the constant temperature and humidity incubator manufacturers to bring you information sharing, learn more about the relevant knowledge, you can pay attention to our official website!